Search gobutton  Advanced Search Customer Service center

Review - 4PC GLASS/TILE DRILL BIT SET

Review - 4PC GLASS/TILE DRILL BIT SET

Drilling Bit Sets for making holes in glass or tile are available for such needs and are being produced and marketed by a number of manufacturers. The Stanley ST-02325 4-Piece Glass and Tile Drill Bit Set has 1/8-inch, 3/16-inch, 1/4-inch, and 5/16-inch hex shank glass and tile bits. The tools have a high-grade tungsten carbide tip for drilling into glass and tile. These bits are required for drilling in glass, tiles, ceramics, mirror glass and porcelain. Tile Bits for drilling ceramic tiles and glass have a ground tungsten carbide tip.

The 4 piece glass/tile drill bit set is excellent for all fine drilling requirements. If you need to drill smaller holes then just make use of these  standard carbide tipped glass bits. Hold the drill to stand perpindicular to the tile or glass or other such similar surfaces. If the drill and glass tile can't be securely clamped in place, begin by drilling a very small pilot hole through the glass to act as a guide. Keep the drill bit and hole lubricated with turpentine or water and operate at a low speed. To reduce the risk of chipping around the exit edges of the cut, drill part way through from one side then complete the cut from the other side.


Such specialized jobs require special drill bits.